480ml of Poe Boy Collodion
57,00€
480 ml de colodión. <strong>Todos los colodiones se suministran en botellas de vidrio de borosilicato de boca ancha para un mejor vertido y para garantizar la estabilidad del producto.</strong>
The Poe Boy collodion is prepared with potassium salts.
Es turbio al mezclarse y necesita entre una semana y un mes para aclararse y que las impurezas precipiten al fondo de la botella. Es necesario decantar: puede que quieras comprar una <a href=”http://analoginside.com/producto/frasco-de-laboratorio-250ml/”>botella de 250ml</a> para tal efecto. Se puede usar turbio sin demasiados problemas, pero recomendamos esperar hasta que el producto esté completamente transparente.
All our collodions are freshly mixed when we receive an order.
Liquitex glossy varnish (473ml)
26,00€
473ml of glossy acrylic Liquitex varnish. This varnish is translucent and soluble in water when liquid. Once it dries it creates a completely waterproof and transparent layer. It doesn’t yellow over time and it’s UV resistant. Therefore, this varnish offers a very high protection to our plates.
It is a very good alternative to traditional varnishes when we use old collodion. Alcohol based varnishes are prone to dissolve the images created with reddish (old) collodion. It is highly recommended the use of this type of water based varnish.
If well preserved, this varnish should last for a long time.
Liquitex glossy varnish (946ml)
40,00€
946ml of glossy acrylic Liquitex varnish. This varnish is translucent and soluble in water when liquid. Once it dries it creates a completely waterproof and transparent layer. It doesn’t yellow over time and it’s UV resistant. Therefore, this varnish offers a very high protection to our plates.
It is a very good alternative to traditional varnishes when we use old collodion. Alcohol based varnishes are prone to dissolve the images created with reddish (old) collodion. It is highly recommended the use of this type of water based varnish.
If well preserved, this varnish should last for a long time.
Falcon Eyes Flash Tube RTC-1555-1500L for TE-1200/TF-1200
59,95€
The Falcon Eyes RTC-1555-1500L Flash Tube is suitable for the following Studio Flash Units:
TE-1200A
TE-1200 Digital
TF-1200A
TF-1200L
Collodion 4% USP (1000ml)
69,00€
1000ml of 4% USP collodion. Plain collodion is a mix of 99% alcohol, ether and nitrocellulose.
It's a very flamable product. It it highly recommended to carefuly read the safety data sheet for this product.
Hydrometer (1,000-1,100 g/cm3)
22,00€
Precision hydrometer calibrated for specific densities between 1,000 g/cm3 and 1,100 g/cm3
Silver nitrate baths used in the wet plate process are a 9% silver nitrate solution in distilled water. That means 90g of silver nitrate dissolved in one liter of distilled water. Once we prepare this mix, there is only one way to find out how much silver nitrate there is in the bath: we need to measure the specific density of the solution with a hydrometer.
A 9% silver nitrate bath has a specific density of 1,067g/cm3. If our bath has a lower density we will have to add silver nitrate to the mix
Falcon Eyes Studio Flash TF-1200L with LCD Display
499,00€
We work with 4 of these 1200 w/s flashes at the studio and an f/4 aperture lens. We are incredibly happy with them. They are incredibly cheap and powerful. But the best advantage that we saw compared with other powerful flashes was the price of the flashbulbs. The price for a 4800w/s flashbulb goes up to 700€-800€ and these 1200 w/s are 59,95€ each.
This professional studio flash has 1200Ws power and a modeling lamp with 250W power. The TF-L series by Falcon Eyes are advanced flashes for the demanding studio photographer. They offer everything you would expect of a professional studio flash, such as a fast recharging time, sturdy metal housing, professional bayonet-connection for accessories, a built-in slave receiver and a very accurate adjustability.
Of course, the modeling lamp can be switched on and off and its power can also be set proportional to the flash power. Also, the flash is equipped with an auto-powerdump function and protection from overheating.
But what really sets this flash apart, is this:
- Clear LCD screen The bright, blue LCD-screen can easily be read.
- Intelligent remote control (optional) With the additional wireless remote control RC-2L, you can change settings such as flash power, when the flash is positioned out of your reach (e.g. at 3 meters height). Furthermore you can control up to 10 different flash units. See "Optional Accessories".
- The possibility to let the slave-receiver flash at the first, second or third flash This way, you can trigger the flash on a flash of your choice. Most studio flashes flash immediately when the built-in slave-receiver detects another flash. But the TF-L flashes can be set to go off at the second and third flash as well. This way, you can use the pre-flash function of you camera flash.
The lamp is fitted at the bottom with a standard spigot connection, That makes it fit on almost any light stand. The lamp has a Falcon Eyes bayonet connector in the front, allowing many different accessories such as softboxes, beauty dishes and reflectors to be connected.
Included:
- Falcon Eyes TF-1200L studio flash
- Flash tube
- Modeling Lamp
- Reflector
- Synchronization cable
- Power cable
- Manual
Albumen Printing Kit 8.5×11″ (21.6×27.7cm)
260,00€
The albumen printing kit has everything that you need to get started. Below are the products included in this kit:
- 20 double-layer albumenized papers
- 1000l silver nitrate solution 12%
- 1l of gold toner
- 1l of fixer
- 1l of Hypo clearing agent
We will also send you a little manual so you can start working with the process.
We usually have a stock of albumenized paper, but it is a handmade product and its preparation can take up to 10 days.
If you have any questions, do not hesitate to write to us at info@analoginside.com
Albumen Printing Kit 8,5×5,5″ (21,6×13,85cm)
180,00€
The albumen printing kit has everything that you need to get started. Below are the products included in this kit:
- 20 double-layer albumenized papers
- 500l silver nitrate solution 12%
- 1l of gold toner
- 1l of fixer
- 1l of hypo clearing agent
We will also send you a little manual so you can start working with the process.
We usually have a stock of albumenized paper, but it is a handmade product and its preparation can take up to 10 days.
If you have any questions, do not hesitate to write to us at info@analoginside.com
Falcon Eyes LHD-B928FS lighting kit
477,00€
The Falcon Eyes LHD-B928FS Daylight Kit contains two LHD-B928FS lamp holders, two octaboxes (80cm), eighteen 28W energy saving spiral lamps each with a power comparability of 140W and two W805 light stands (2.35m).
This set is ideal for product photography, portrait photography and videography and is suitable for both, beginner and experienced photographers and videographers. The LHD-B928FS is equipped with 5 power switches, allowing you to switch the lamps on and off separately. If you wish to minimize your light output, you can simply switch off 1, 2, 3, 4, 5, 6, 7 or 8 of the lamps.
Optional spiral lamps can be purchased if you wish to have more light. The 28W bulbs can be replaced with 5 40W, 55W, 70W or 85W lamps. The maximum light output is 2125W, which is equivalent to 5 85W spiral lamps. Further, a reflector can be used instead of the supplied octabox. Such optional accessories can be found in the optional accessories tab below.
The kit includes:
- 2x Lamp Holder LHD-B928FS
- 2x W805 Light Stand
- 2x 80cm octaboxes
- 18x 28W Spiral Lamp
4×5″ Wet Plate collodion Kit (10x12cm)
400,00€
The 4×5″ collodion kit includes all the basics to get you started. That way, you don't have to go looking for the products in the shop one by one. We have already put them together in this kit, which will also be a little cheaper than buying them individually.
The kit includes:
- Silver plating tank for plates up to 4×5″.
- Plate drainer.
- 10 4×5″ lacquered aluminum plates (If you use modified film chassis, please indicate the exact dimensions of the plate).
- Density meter (1,000-1,100 G/cm3).
- 1l of developer.
- 240ml of Collodion Lea #7
- 1l of fixative.
- 500ml Silver Nitrate Bath
- 250ml of sandarac gum varnish.
- 450ml of glass plate cleaner.
The tanks are made on demand, so the order will take between two and three weeks to leave our laboratory.
If you have any questions do not hesitate to write to us info@analoginside.com
5×7″ (13x18cm) Collodion Starter Kit.
460,00€
The 5×7″ collodion kit includes all the basics to get started in this process. So that you don't have to look for the products in the shop one by one, we have put them together in this kit, which will also be a little cheaper than buying them individually.
The kit includes:
- Silver plating tank for plates up to 5×7″.
- Plate drainer.
- 10 5×7″ lacquered aluminum plates (If you use modified film chassis, please indicate the exact dimensions of the plate).
- Density meter (1,000-1,100 G/cm3).
- 1l of developer.
- 240ml of Collodion Lea #7
- 1l of fixer.
- 700ml of Silver Nitrate Bath
- 250ml of sandarac gum varnish filtered with activated carbon.
- 450ml of glass plate cleaner.
The tanks are made on demand, so the order will take between two and three weeks to leave our laboratory.
If you have any questions do not hesitate to write to us info@analoginside.com