Albumen Printing Kit 8.5×11″ (21.6×27.7cm)
260,00€
The albumen printing kit has everything that you need to get started. Below are the products included in this kit:
- 20 double-layer albumenized papers
- 1000l silver nitrate solution 12%
- 1l of gold toner
- 1l of fixer
- 1l of Hypo clearing agent
We will also send you a little manual so you can start working with the process.
We usually have a stock of albumenized paper, but it is a handmade product and its preparation can take up to 10 days.
If you have any questions, do not hesitate to write to us at info@analoginside.com
Albumen Printing Kit 8,5×5,5″ (21,6×13,85cm)
180,00€
The albumen printing kit has everything that you need to get started. Below are the products included in this kit:
- 20 double-layer albumenized papers
- 500l silver nitrate solution 12%
- 1l of gold toner
- 1l of fixer
- 1l of hypo clearing agent
We will also send you a little manual so you can start working with the process.
We usually have a stock of albumenized paper, but it is a handmade product and its preparation can take up to 10 days.
If you have any questions, do not hesitate to write to us at info@analoginside.com
Falcon Eyes LHD-B928FS lighting kit
477,00€
The Falcon Eyes LHD-B928FS Daylight Kit contains two LHD-B928FS lamp holders, two octaboxes (80cm), eighteen 28W energy saving spiral lamps each with a power comparability of 140W and two W805 light stands (2.35m).
This set is ideal for product photography, portrait photography and videography and is suitable for both, beginner and experienced photographers and videographers. The LHD-B928FS is equipped with 5 power switches, allowing you to switch the lamps on and off separately. If you wish to minimize your light output, you can simply switch off 1, 2, 3, 4, 5, 6, 7 or 8 of the lamps.
Optional spiral lamps can be purchased if you wish to have more light. The 28W bulbs can be replaced with 5 40W, 55W, 70W or 85W lamps. The maximum light output is 2125W, which is equivalent to 5 85W spiral lamps. Further, a reflector can be used instead of the supplied octabox. Such optional accessories can be found in the optional accessories tab below.
The kit includes:
- 2x Lamp Holder LHD-B928FS
- 2x W805 Light Stand
- 2x 80cm octaboxes
- 18x 28W Spiral Lamp
4×5″ Wet Plate collodion Kit (10x12cm)
400,00€
The 4×5″ collodion kit includes all the basics to get you started. That way, you don't have to go looking for the products in the shop one by one. We have already put them together in this kit, which will also be a little cheaper than buying them individually.
The kit includes:
- Silver plating tank for plates up to 4×5″.
- Plate drainer.
- 10 4×5″ lacquered aluminum plates (If you use modified film chassis, please indicate the exact dimensions of the plate).
- Density meter (1,000-1,100 G/cm3).
- 1l of developer.
- 240ml of Collodion Lea #7
- 1l of fixative.
- 500ml Silver Nitrate Bath
- 250ml of sandarac gum varnish.
- 450ml of glass plate cleaner.
The tanks are made on demand, so the order will take between two and three weeks to leave our laboratory.
If you have any questions do not hesitate to write to us info@analoginside.com
5×7″ (13x18cm) Collodion Starter Kit.
460,00€
The 5×7″ collodion kit includes all the basics to get started in this process. So that you don't have to look for the products in the shop one by one, we have put them together in this kit, which will also be a little cheaper than buying them individually.
The kit includes:
- Silver plating tank for plates up to 5×7″.
- Plate drainer.
- 10 5×7″ lacquered aluminum plates (If you use modified film chassis, please indicate the exact dimensions of the plate).
- Density meter (1,000-1,100 G/cm3).
- 1l of developer.
- 240ml of Collodion Lea #7
- 1l of fixer.
- 700ml of Silver Nitrate Bath
- 250ml of sandarac gum varnish filtered with activated carbon.
- 450ml of glass plate cleaner.
The tanks are made on demand, so the order will take between two and three weeks to leave our laboratory.
If you have any questions do not hesitate to write to us info@analoginside.com
8×10″ Collodion Kit (20x25cm)
500,00€
The 8×10″ collodion kit includes all the basics to get you started. That way, you don't have to go looking for the products in the shop one by one. We have already put them together in this kit, which will also be a little cheaper than buying them individually.
The kit includes:
- Silver plating tank for plates up to 8×10″.
- Plate drainer.
- 10 8×10″ lacquered aluminum plates (If you use modified film chassis, please indicate the exact dimensions of the plate).
- Density meter (1,000-1,100 G/cm3).
- 1l of developer.
- 240ml of Collodion Lea #7
- 1l of fixative.
- 1000ml Silver Nitrate Bath
- 250ml of sandarac gum varnish filtered with activated charcoal.
- 450ml of glass plate cleaner.
The tanks are made on demand, so the order will take between two and three weeks to leave our laboratory.
If you have any questions do not hesitate to write to us info@analoginside.com
Salted Paper Kit 8.5×11″ (21.6×27.7cm)
235,00€
The salted paper printing kit has everything that you need to get started. Below are the products included in this kit:
- 20 Salted papers
- 1l of 12% silver nitrate solution
- 1l of gold toner
- 1l of fixer
- 1l of Hipor clearing agent
We will also send you a little manual so you can start working with the process.
We usually don't have a stock of salted paper. It is a handmade product and its preparation can take up to 10 days.
If you have any questions, do not hesitate to write to us at info@analoginside.com
Salted Paper Kit 8.5×5.5″ (21.6×13.85cm)
169,00€
The salted paper printing kit has everything that you need to get started. Below are the products included in this kit:
- 20 Savoury papers
- 500l silver nitrate solution 12%
- 1l of gold turner
- 1l of fixative
- 1l of hyposulphite remover
We will also send you a little manual so you can start working with the process.
We usually don't have a stock of salted paper. It is a handmade product and its preparation can take up to 10 days.
If you have any questions, do not hesitate to write to us at info@analoginside.com
Modeling lamp 220V-250W
9,25€
The Excella Modeling Lamp has a light output of 250W and is equipped with an E27 lamp socket.
Plate cleaner (calcium carbonate)
5,95€
The glass plate cleaner comes in a 450ml dispensing bottle. It's made from calcium carbonate, alcohol and distilled water.
Shake well before using the plate cleaner.
Drying Rack for 6x6cm 4×5″, 5×7″ and 8×10″ (10x12cm, 13x18cm, 20x25cm)
12,00€
Pine wood drying rack for 10 aluminium or glass plates. Probably the smallest drying rack on the market. Due to its small size is ideal for using it on the field
Size: 17,5 x 5 x 1,8 cm
For plate sizes: 6x6 cm, 4×5″, 5×7″ and 8×10″ (6x6cm 10x12cm, 13x18cm, 20x25cm).
The slots are designed to hold the plates and at the same time avoid scratching the emulsion.
Custom drying racks for bigger than 11×14″ plates can be ordered. Ask for pricing at: info@analoginside.com
Falcon Eyes Foldable Octabox FEOB-8 80 cm
74,95€
The Falcon Eyes FEOB-8 Foldable Octabox has a diameter of 80 cm and is easy to set up. The FEOB-8 is suitable for portrait and product photography and is supplied with 2 diffuse cloths. The diffuse material spreads the light evenly, provides a neutral colour temperature and minimizes shadows and reflections.
Falcon Eyes FEOB-8 Foldable Octabox Specifications
The FEOB-8 is supplied with a standard Falcon Eyes speed ring. This speed ring is compatible with all Falcon Eyes studio flash units except for the Falcon Eyes SS series.
By using an additional speed ring adapter, the FEOB-8 is compatible with Bowens, Broncolor, Elichrom, Hensel, Multiblitz and Linkstar studio flash units.
Included:
1 x Foldable Octabox
1 x Falcon Eyes Adapter Ring
1 x Diffuse Cloth (ø 43 cm)
1 x Diffuse Cloth (ø 80 cm)
Protective Sleeve