Clear borosilicate lab bottle (250ml)

0 out of 5
9,00

250ml clear borosilicate bottle

Forget about old bottles and cork caps! Use modern lab bottles to help preserve your chemicals. These bottles are more resistant to impacts and temperature changes than regular glass bottles; they also have airtight caps.

Clear borosilicate lab bottle (500ml)

0 out of 5
11,00

500ml clear borosilicate bottle

Forget about old bottles and cork caps! Use modern lab bottles to help preserve your chemicals. These bottles are more resistant to impacts and temperature changes than regular glass bottles; they also have airtight caps.

Safety goggles

0 out of 5
7,00

Safety goggles.

Safety goggles are essential when mixing collodion salts and in every process which involves acids, silver nitrate or any other harmful chemical.

Nitrile Gloves 100pcs

0 out of 5
18,00

Nitrile glove box 100pcs.

The use of nitrile gloves is highly recommended for alternative processes because they don’t have talcum powder that might ruin your prints and they are more resistant to chemicals than latex gloves.

10ml syringes

0 out of 5
0,70

10ml syringe.

The syringes are ideal for measuring small amounts of liquids accurately without the use of pipettes, which are much more expensive. For example, to replenish ether and alcohol in the excess collodion to return it to the original proportions of the mixture.

As with the other bottles, funnels, etc. involved in the process, it is essential to use them for a single chemical to avoid cross-contamination.

20ml syringe

0 out of 5
0,95

20ml syringe.

The syringes are ideal for measuring small amounts of liquids accurately without the use of pipettes, which are much more expensive. For example, to replenish ether and alcohol in the excess collodion to return it to the original proportions of the mixture.

As with the other bottles, funnels, etc. involved in the process, it is essential to use them for a single chemical to avoid cross-contamination.

Albumen Printing Kit 8.5×11″ (21.6×27.7cm)

0 out of 5
260,00

The albumen printing kit has everything that you need to get started. Below are the products included in this kit:

- 20 double-layer albumenized papers
- 1000l silver nitrate solution 12%
- 1l of gold toner
- 1l of fixer
- 1l of Hypo clearing agent

We will also send you a little manual so you can start working with the process.

We usually have a stock of albumenized paper, but it is a handmade product and its preparation can take up to 10 days.

If you have any questions, do not hesitate to write to us at info@analoginside.com

Albumen Printing Kit 8,5×5,5″ (21,6×13,85cm)

0 out of 5
180,00

The albumen printing kit has everything that you need to get started. Below are the products included in this kit:

- 20 double-layer albumenized papers
- 500l silver nitrate solution 12%
- 1l of gold toner
- 1l of fixer
- 1l of hypo clearing agent

We will also send you a little manual so you can start working with the process.

We usually have a stock of albumenized paper, but it is a handmade product and its preparation can take up to 10 days.

If you have any questions, do not hesitate to write to us at info@analoginside.com

Falcon Eyes LHD-B928FS lighting kit

0 out of 5
477,00

The Falcon Eyes LHD-B928FS Daylight Kit contains two LHD-B928FS lamp holders, two octaboxes (80cm), eighteen 28W energy saving spiral lamps each with a power comparability of 140W and two W805 light stands (2.35m).

This set is ideal for product photography, portrait photography and videography and is suitable for both, beginner and experienced photographers and videographers. The LHD-B928FS is equipped with 5 power switches, allowing you to switch the lamps on and off separately. If you wish to minimize your light output, you can simply switch off 1, 2, 3, 4, 5, 6, 7 or 8 of the lamps.

Optional spiral lamps can be purchased if you wish to have more light. The 28W bulbs can be replaced with 5 40W, 55W, 70W or 85W lamps. The maximum light output is 2125W, which is equivalent to 5 85W spiral lamps. Further, a reflector can be used instead of the supplied octabox. Such optional accessories can be found in the optional accessories tab below.

The kit includes:

  • 2x Lamp Holder LHD-B928FS
  • 2x W805 Light Stand
  • 2x 80cm octaboxes
  • 18x 28W Spiral Lamp

4×5″ Wet Plate collodion Kit (10x12cm)

0 out of 5
400,00

The 4×5″ collodion kit includes all the basics to get you started. That way, you don't have to go looking for the products in the shop one by one. We have already put them together in this kit, which will also be a little cheaper than buying them individually.

The kit includes:

- Silver plating tank for plates up to 4×5″.
- Plate drainer.
- 10 4×5″ lacquered aluminum plates (If you use modified film chassis, please indicate the exact dimensions of the plate).
- Density meter (1,000-1,100 G/cm3).
- 1l of developer.
- 240ml of Collodion Lea #7
- 1l of fixative.
- 500ml Silver Nitrate Bath
- 250ml of sandarac gum varnish.
- 450ml of glass plate cleaner.

The tanks are made on demand, so the order will take between two and three weeks to leave our laboratory.
If you have any questions do not hesitate to write to us info@analoginside.com

5×7″ (13x18cm) Collodion Starter Kit.

0 out of 5
460,00

The 5×7″ collodion kit includes all the basics to get started in this process. So that you don't have to look for the products in the shop one by one, we have put them together in this kit, which will also be a little cheaper than buying them individually.

The kit includes:

- Silver plating tank for plates up to 5×7″.
- Plate drainer.
- 10 5×7″ lacquered aluminum plates (If you use modified film chassis, please indicate the exact dimensions of the plate).
- Density meter (1,000-1,100 G/cm3).
- 1l of developer.
- 240ml of Collodion Lea #7
- 1l of fixer.
- 700ml of Silver Nitrate Bath
- 250ml of sandarac gum varnish filtered with activated carbon.
- 450ml of glass plate cleaner.

The tanks are made on demand, so the order will take between two and three weeks to leave our laboratory.
If you have any questions do not hesitate to write to us info@analoginside.com

8×10″ Collodion Kit (20x25cm)

0 out of 5
500,00

The 8×10″ collodion kit includes all the basics to get you started. That way, you don't have to go looking for the products in the shop one by one. We have already put them together in this kit, which will also be a little cheaper than buying them individually.

The kit includes:

- Silver plating tank for plates up to 8×10″.
- Plate drainer.
- 10 8×10″ lacquered aluminum plates (If you use modified film chassis, please indicate the exact dimensions of the plate).
- Density meter (1,000-1,100 G/cm3).
- 1l of developer.
- 240ml of Collodion Lea #7
- 1l of fixative.
- 1000ml Silver Nitrate Bath
- 250ml of sandarac gum varnish filtered with activated charcoal.
- 450ml of glass plate cleaner.

The tanks are made on demand, so the order will take between two and three weeks to leave our laboratory.
If you have any questions do not hesitate to write to us info@analoginside.com

Showing 61-72 of 98 results