Alcohol lamps are used to dry and varnish wet plates.
Alcohol Lamp
16,00€
Alcohol lamps are used to dry and varnish wet plates.
Product added!
Take a look at the wish list
The product is already on your wish list!
Take a look at the wish list
Category: Lab and Darkroom EquipmentTags: alcohol, ambrotype, ambrotype, borosilicate, collodion, wet collodion, ferrotype, alcohol lamp, lighter, silver nitrate tank, silver tank, tank, tintype, glass, wet plate
Related products
Hydrometer (1,000-1,100 g/cm3)
0 out of 5
22,00€
Precision hydrometer calibrated for specific densities between 1,000 g/cm3 and 1,100 g/cm3
Silver nitrate baths used in the wet plate process are a 9% silver nitrate solution in distilled water. That means 90g of silver nitrate dissolved in one liter of distilled water. Once we prepare this mix, there is only one way to find out how much silver nitrate there is in the bath: we need to measure the specific density of the solution with a hydrometer.
A 9% silver nitrate bath has a specific density of 1,067g/cm3. If our bath has a lower density we will have to add silver nitrate to the mix
Product added!
Take a look at the wish list
The product is already on your wish list!
Take a look at the wish list
11x14" (28x36cm) Silver Nitrate Tank
0 out of 5
280,00€
Silver nitrate bath tank for 11×14″" (27x36cm) plates
The tank is built with acrylic and protected with a plywood box. We don't make our tanks just out of acrylic. The plywood protects the tank against most shocks and in if the acrylic breaks, the silver nitrate bath will remain inside the wooden box and will not be spilled and lost.
Normally we do not have silver nitrate tanks in stock. We manufacture them once we receive your order and it takes two or three weeks to make them (depending on the size).
If you need a non-standard size tank, send us an email and we will give you a price for it: info@analoginside.com
Product added!
Take a look at the wish list
The product is already on your wish list!
Take a look at the wish list
Nitrile Gloves 100pcs
0 out of 5
18,00€
Nitrile glove box 100pcs.
The use of nitrile gloves is highly recommended for alternative processes because they don’t have talcum powder that might ruin your prints and they are more resistant to chemicals than latex gloves.
Product added!
Take a look at the wish list
The product is already on your wish list!
Take a look at the wish list
Contact Printing Frame 25x30cm (for 8×10″ copies)
0 out of 5
150,00€
High quality contact printing frame made of wood, felt and stainless steel. 6mm thick glass included.
If you need any size bigger than the ones available in our store, write us at info@analoginside.com
Product added!
Take a look at the wish list
The product is already on your wish list!
Take a look at the wish list
Ratings
No ratings yet.